Del.icio.us Digg Reddit Technorati Furl

s13rebuild197

Jul 7, 2008

This is the test install. I went ahead and installed the ka24de throttle body and it slightly rubs the valve cover. The valve cover will need to be modified before the final install.

Before the test install, some of the mounting points were drilled out to 1/2". The rest will need to be drilled to 3/8".
Front view of the motor with the Pulsar manifold installed.

This entry was posted on Monday, July 7th, 2008 at 6:37 am and is filed under . You can follow any responses to this entry through the RSS 2.0 feed. Responses are currently closed, but you can trackback from your own site.

Comments are closed.