Del.icio.us Digg Reddit Technorati Furl

ca18det0ttpulsarmanifold210

Jul 11, 2008

After removing the long plate, remove the short one and expose the back side of the nipple outlet. Now is also a good time to use a little bit of Gumout and clean the valve cover.

Flip the cover over and remove the 6 screws holding the long metal plate in.
This is what is left when the base of the cut nipple is removed from the valve cover.

This entry was posted on Friday, July 11th, 2008 at 10:43 am and is filed under . You can follow any responses to this entry through the RSS 2.0 feed. Responses are currently closed, but you can trackback from your own site.

Comments are closed.