Del.icio.us Digg Reddit Technorati Furl

ca18detottpulsarmanifold226

Jul 11, 2008

Tap the coldstart hole.

After removal, plug the valve cover vent (PCV) with a 1/4" brass plug from the hardware store. (Note: I run my valve cover vents to an oil catch can. If you don't do this, you will want to keep this connection and just use a short piece of heater hose from the manifold to the valve cover.)
Then thread the second 1/4" plug into the hole.

This entry was posted on Friday, July 11th, 2008 at 11:44 am and is filed under . You can follow any responses to this entry through the RSS 2.0 feed. Responses are currently closed, but you can trackback from your own site.

Comments are closed.