Del.icio.us Digg Reddit Technorati Furl

ca18detottpulsarmanifold228

Jul 11, 2008

Flip the manifold over once again and install the AAC and IAA from the CA18DET manifold to the new manifold. It will bolt up perfectly. (You can freshen up the gaskets with copper spray or a VERY thin coat of RTV)

Then thread the second 1/4" plug into the hole.
Since we kept the CA18DET lower manifold, you can go ahead and remove the water lines as well as the sensor from the new upper manifold.

This entry was posted on Friday, July 11th, 2008 at 11:47 am and is filed under . You can follow any responses to this entry through the RSS 2.0 feed. Responses are currently closed, but you can trackback from your own site.

Comments are closed.