Del.icio.us Digg Reddit Technorati Furl

ca18detottpulsarmanifold27

Jul 11, 2008

With the valve cover removed, cut this nipple close to its base.

Test fit the manifold and valve cover to make sure you have removed enough material. Then remove the cover 1 more time for additional modification.
Once cut, use a flat head screwdriver and fold the edges of what is left of the nipple inward. Then tap the piece into the valve cover using a hammer and extension.

This entry was posted on Friday, July 11th, 2008 at 10:35 am and is filed under . You can follow any responses to this entry through the RSS 2.0 feed. Responses are currently closed, but you can trackback from your own site.

Comments are closed.