Del.icio.us Digg Reddit Technorati Furl

ca18detottpart3e

Jul 23, 2008

Once stripped, pull the desired plugs away from the bundle and secure them to the back of the harness with electrical tape. You are effectively making a T so these plugs can route elsewhere.

Once stripped, pull the desired plugs away from the bundle and secure them to the back of the harness with electrical tape. You are effectively making a T so these plugs can route elsewhere.

Locate the indicated plugs and then carefully strip the wrap on the wiring harness.
Re-wrap the bundle using electrical tape and then install the harness. You can secure the harness with zip ties to the top of the fuel rail.

This entry was posted on Wednesday, July 23rd, 2008 at 9:01 am and is filed under . You can follow any responses to this entry through the RSS 2.0 feed. Responses are currently closed, but you can trackback from your own site.

Comments are closed.