Del.icio.us Digg Reddit Technorati Furl

dsoilcooler5

Aug 4, 2008

The 1/8" by 1/4" inch adapter is padded with 2 x 5/16" washers before threading into the built in cooler.

Reinstall the unit into the block. Note the brass fittings to the left of the oil filter.
The 1/8" to 1/4" adapters installed in the transmission cooler of the radiator.

This entry was posted on Monday, August 4th, 2008 at 8:30 am and is filed under . You can follow any responses to this entry through the RSS 2.0 feed. Responses are currently closed, but you can trackback from your own site.

Comments are closed.