Del.icio.us Digg Reddit Technorati Furl

day26b

Sep 8, 2008

The offender is the cam cap bolt. These snap very easily as they are only supposed to see 8.5 ft-lbs torque. This is how I learned my torque wrench was out of spec.

The offender is the cam cap bolt. These snap very easily as they are only supposed to see 8.5 ft-lbs torque. This is how I learned my torque wrench was out of spec.

Using a grinder, you have to taper the end of a deep 13mm socket in order to reach the head bolts.

This entry was posted on Monday, September 8th, 2008 at 9:51 am and is filed under . You can follow any responses to this entry through the RSS 2.0 feed. Responses are currently closed, but you can trackback from your own site.

Comments are closed.