Del.icio.us Digg Reddit Technorati Furl

mr2scangauge10

Oct 10, 2008

Now pull the back off of the ScanGaugeII.

Flip the ScanGaugeII over and remove the 4 screws that hold the housing together.
Line the removed piece to the area where the clock was removed on the panel. Make sure that you have the ScanGaugeII back piece aligned in the upright position.

This entry was posted on Friday, October 10th, 2008 at 8:14 pm and is filed under . You can follow any responses to this entry through the RSS 2.0 feed. Responses are currently closed, but you can trackback from your own site.

Comments are closed.