Del.icio.us Digg Reddit Technorati Furl

mr2spyderpowersteering5h

Oct 29, 2008

Grind all surfaces of the two circles to expose fresh metal.

Grind all surfaces of the two circles to expose fresh metal.

Smooth the edges with the grinder.
The edge of the circles are also shaped with the grinder to slide right inside the pipe to for the top and bottom.

This entry was posted on Wednesday, October 29th, 2008 at 7:35 am and is filed under . You can follow any responses to this entry through the RSS 2.0 feed. Responses are currently closed, but you can trackback from your own site.

Comments are closed.