Del.icio.us Digg Reddit Technorati Furl

mr2spyderpowersteering5x

Oct 29, 2008

Drill 2 holes in the attached bracket. These will serve as mounting points for the reservoir.

Weld the new bracket to the side of the reservoir.
After a through cleaning and sanding, I decided to powdercoat the reservoir. This image shows the coat media sprayed on.

This entry was posted on Wednesday, October 29th, 2008 at 8:24 am and is filed under . You can follow any responses to this entry through the RSS 2.0 feed. Responses are currently closed, but you can trackback from your own site.

Comments are closed.