Del.icio.us Digg Reddit Technorati Furl

mr2spyderpowersteering5z

Oct 29, 2008

The piece is then baked at 400 degrees fahrenheit for 10 minutes to set the powdercoat.

The piece is then baked at 400 degrees fahrenheit for 10 minutes to set the powdercoat.

After a through cleaning and sanding, I decided to powdercoat the reservoir. This image shows the coat media sprayed on.
The finished product with 4 x 1/4" brass barb fittings thread into the bottom.

This entry was posted on Wednesday, October 29th, 2008 at 8:26 am and is filed under . You can follow any responses to this entry through the RSS 2.0 feed. Responses are currently closed, but you can trackback from your own site.

Comments are closed.