Del.icio.us Digg Reddit Technorati Furl

240sxpart2-16

Dec 18, 2008

Using 3" x 3" pieces of 1/8" thick steel, I began to shape the rear mounts with a table grinder.

The four mount points now look like this.
The finished driver's side rear mount.

This entry was posted on Thursday, December 18th, 2008 at 9:22 am and is filed under . You can follow any responses to this entry through the RSS 2.0 feed. Responses are currently closed, but you can trackback from your own site.

Comments are closed.