Del.icio.us Digg Reddit Technorati Furl

240sxpart2-17

Dec 18, 2008

The finished driver's side rear mount.

Using 3" x 3" pieces of 1/8" thick steel, I began to shape the rear mounts with a table grinder.
The less complex driver's side front mount. This will be reinforced underneath after the roll cage is mounted.

This entry was posted on Thursday, December 18th, 2008 at 9:23 am and is filed under . You can follow any responses to this entry through the RSS 2.0 feed. Responses are currently closed, but you can trackback from your own site.

Comments are closed.