Del.icio.us Digg Reddit Technorati Furl

differentialwelding21

Jun 5, 2008

Place a bead rtv silicone around the rear of the housing and then reinstall the rear cover.

Once everything cools down, reinstall the final drive gear and insert the diff gears back into the housing taking care to install the bearings, spacers and bearing caps back in their proper locations.
Place the differential back in position using the hydraulic jack. Connect everything back together in the reverse order that it was removed.

This entry was posted on Thursday, June 5th, 2008 at 10:12 am and is filed under . You can follow any responses to this entry through the RSS 2.0 feed. Responses are currently closed, but you can trackback from your own site.

Comments are closed.