Del.icio.us Digg Reddit Technorati Furl

differentialwelding9

Jun 5, 2008

Tap the ouput shaft flanges out of the housing.

Remove the 2 bearing caps and set them to the side. Be sure to keep them in order.
The output shaft flanges and the bearing caps removed from the differential. Take care to keep these items in order. They should be reinstalled on the same side and the same orientation they were removed from.

This entry was posted on Thursday, June 5th, 2008 at 9:39 am and is filed under . You can follow any responses to this entry through the RSS 2.0 feed. Responses are currently closed, but you can trackback from your own site.

Comments are closed.