Del.icio.us Digg Reddit Technorati Furl

p1060809

Jun 24, 2008

Reassemble the cluster in the reverse order of removal. Note that you cannot see the black tape that blocks the P/S warning light from illuminating.

Flip the cluster face over and place a small piece of eletric (black) tape over the back side of the P/S etching.

This entry was posted on Tuesday, June 24th, 2008 at 7:26 am and is filed under . You can follow any responses to this entry through the RSS 2.0 feed. Responses are currently closed, but you can trackback from your own site.

Comments are closed.