Del.icio.us Digg Reddit Technorati Furl

psremoval39

Jun 24, 2008

Repeat the previous process on the black tabs to remove the solid trim from the cluster face.

Now remove the clear plastic cover by depressing all of the clear tabs around the front housing.
The cluster face with the trim removed. Now begin to gently pry the face away from the circuit board. Start at the edges and work your way around.

This entry was posted on Tuesday, June 24th, 2008 at 7:21 am and is filed under . You can follow any responses to this entry through the RSS 2.0 feed. Responses are currently closed, but you can trackback from your own site.

Comments are closed.