Del.icio.us Digg Reddit Technorati Furl

ca18detottpulsarmanifold225

Jul 11, 2008

After removal, plug the valve cover vent (PCV) with a 1/4" brass plug from the hardware store. (Note: I run my valve cover vents to an oil catch can. If you don't do this, you will want to keep this connection and just use a short piece of heater hose from the manifold to the valve cover.)

Locate and remove the coldstart and the valve cover vent or PCV (next to cold start)
Tap the coldstart hole.

This entry was posted on Friday, July 11th, 2008 at 11:42 am and is filed under . You can follow any responses to this entry through the RSS 2.0 feed. Responses are currently closed, but you can trackback from your own site.

Comments are closed.