Del.icio.us Digg Reddit Technorati Furl

dsoilcooler12

Aug 4, 2008

Reinstall the unit into the block. Note the brass fittings to the left of the oil filter.

Witht he adapter off you can see how I adapted the 3/8" ports on the adapter to 1/4".
The 1/8" by 1/4" inch adapter is padded with 2 x 5/16" washers before threading into the built in cooler.

This entry was posted on Monday, August 4th, 2008 at 8:26 am and is filed under . You can follow any responses to this entry through the RSS 2.0 feed. Responses are currently closed, but you can trackback from your own site.

Comments are closed.