Del.icio.us Digg Reddit Technorati Furl

dsoilcooler20

Aug 5, 2008

The re-flared end should look like this.

Note the lack of a flare on the cut end.
Make the appropriate bends and connect the first line to the radiator. Tighten the connections down and then repeat for the second line. The end result will look like this.

This entry was posted on Tuesday, August 5th, 2008 at 7:55 am and is filed under . You can follow any responses to this entry through the RSS 2.0 feed. Responses are currently closed, but you can trackback from your own site.

Comments are closed.