Del.icio.us Digg Reddit Technorati Furl

dsoilcooler9

Aug 4, 2008

Witht he adapter off you can see how I adapted the 3/8" ports on the adapter to 1/4".

The adapter is then secured to the mount with the center stud as shown. This is an extension that will come with the adapter.
Reinstall the unit into the block. Note the brass fittings to the left of the oil filter.

This entry was posted on Monday, August 4th, 2008 at 8:23 am and is filed under . You can follow any responses to this entry through the RSS 2.0 feed. Responses are currently closed, but you can trackback from your own site.

Comments are closed.