Del.icio.us Digg Reddit Technorati Furl

mr2scangauge15

Oct 10, 2008

I ended up using three holes with small bolts to connect the back of the ScangaugeII to the dash panel.

This image shows the general idea behind mounting the gauge. Small bolts will be placed through the back of the ScanGaugeII panel and then through the dash panel.
The bolts are then secured with nuts on the back side of the dash panel. The back of the ScanGaugeII is now firmly attached to the panel.

This entry was posted on Friday, October 10th, 2008 at 8:23 pm and is filed under . You can follow any responses to this entry through the RSS 2.0 feed. Responses are currently closed, but you can trackback from your own site.

Comments are closed.