Del.icio.us Digg Reddit Technorati Furl

mr2scangauge5

Oct 10, 2008

Flip to the back of the panel and remove the circuit board of the clock by lifting the 4 indicated tabs.

After unplugging the clock, set the panle aside.
Once the tabs are lifted, pull the clock's circuit board out of the housing.

This entry was posted on Friday, October 10th, 2008 at 8:09 pm and is filed under . You can follow any responses to this entry through the RSS 2.0 feed. Responses are currently closed, but you can trackback from your own site.

Comments are closed.