Del.icio.us Digg Reddit Technorati Furl

mr2scangauge7

Oct 10, 2008

Press the two indicated tabs to pull the clock cover from the panel.

Once the tabs are lifted, pull the clock's circuit board out of the housing.
Flip the ScanGaugeII over and remove the 4 screws that hold the housing together.

This entry was posted on Friday, October 10th, 2008 at 8:12 pm and is filed under . You can follow any responses to this entry through the RSS 2.0 feed. Responses are currently closed, but you can trackback from your own site.

Comments are closed.