Del.icio.us Digg Reddit Technorati Furl

mr2scangauge9

Oct 10, 2008

Flip the ScanGaugeII over and remove the 4 screws that hold the housing together.

Press the two indicated tabs to pull the clock cover from the panel.
Now pull the back off of the ScanGaugeII.

This entry was posted on Friday, October 10th, 2008 at 8:13 pm and is filed under . You can follow any responses to this entry through the RSS 2.0 feed. Responses are currently closed, but you can trackback from your own site.

Comments are closed.