Del.icio.us Digg Reddit Technorati Furl

mr2spyderpowersteering5aa

Oct 29, 2008

The finished product with 4 x 1/4" brass barb fittings thread into the bottom.

The piece is then baked at 400 degrees fahrenheit for 10 minutes to set the powdercoat.

This entry was posted on Wednesday, October 29th, 2008 at 8:28 am and is filed under . You can follow any responses to this entry through the RSS 2.0 feed. Responses are currently closed, but you can trackback from your own site.

Comments are closed.