Del.icio.us Digg Reddit Technorati Furl

mr2spyderpowersteering5k

Oct 29, 2008

Enlarge the holes until they can accept the 4 x 1/4" female hose adapters.

Drill three small concentric pilot holes into the bottom circle.
The 4 x 1/4" adapters will fit through the holes as shown.

This entry was posted on Wednesday, October 29th, 2008 at 8:11 am and is filed under . You can follow any responses to this entry through the RSS 2.0 feed. Responses are currently closed, but you can trackback from your own site.

Comments are closed.