Del.icio.us Digg Reddit Technorati Furl

mr2spyderpowersteering5r

Oct 29, 2008

The new welds are ground down one more time, making sure not to remove too much this time.

To remedy the over grinding, a small weld is placed around all 4 adapters to ensure proper seals.
Flipping the piece over, you can see that there are now 4 secured 1/4" female ports attached to the circle.

This entry was posted on Wednesday, October 29th, 2008 at 8:19 am and is filed under . You can follow any responses to this entry through the RSS 2.0 feed. Responses are currently closed, but you can trackback from your own site.

Comments are closed.