Del.icio.us Digg Reddit Technorati Furl

mr2spyderpowersteering5y

Oct 29, 2008

After a through cleaning and sanding, I decided to powdercoat the reservoir. This image shows the coat media sprayed on.

Drill 2 holes in the attached bracket. These will serve as mounting points for the reservoir.
The piece is then baked at 400 degrees fahrenheit for 10 minutes to set the powdercoat.

This entry was posted on Wednesday, October 29th, 2008 at 8:25 am and is filed under . You can follow any responses to this entry through the RSS 2.0 feed. Responses are currently closed, but you can trackback from your own site.

Comments are closed.