Introduction After installing the Speed Source shifter bushings it is time to tackle the other end of the shifter mechanism. Namely, the rubber bushings at the end of the shifter cables. By replacing the rubber cable ends with solid bushings,…
Introduction What Speed Source offers with their solid aluminum shifter bushings is nothing short of amazing when you realize just how profoundly these bushings alter the feel of the Spyder. By replacing the factory rubber bushings with solid aluminum units,…
Introduction Let’s start with semantics. With the mid-engined, transversely mounted Spyder, you basically have a fwd Corolla engine sitting behind the passenger compartment driving the rear wheels. This means the transmission and differential are part of the same unit and…
Related Links MR2 Spyder Power Steering Removal (Part 1: Try Before You Buy) MR2 Spyder Power Steering Removal (Part 2: The Vented Surge Box) MR2 Spyder Power Steering Removal (Part 3: Disabling the P/S Warning Light) MR2 Spyder Power Steering…
The ScanGaugeII is a small automotive computer that interfaces with the OBDII port of the MR2 Spyder. It contains a small LCD screen that can be used to display the motor’s factory sensors in realtime. Although the ScanGaugeII is a…
I must admit that this is a first for me. I have never installed a head unit in any car that I’ve owned because frankly, I am not an audophile. I always figure that if I am going to spend…
Related Links MR2 Spyder Power Steering Removal (Part 1: Try Before You Buy) MR2 Spyder Power Steering Removal (Part 2: The Vented Surge Box) MR2 Spyder Power Steering Removal (Part 3: Disabling the P/S Warning Light) MR2 Spyder Power Steering…
June 24, 2008 Part 3 of removing the power steering from the MR2 Spyder has been added. MR2 Spyder Power Steering Removal (Part 3: Disabling the P/S Warning Light) June 13, 2008 New updates to Project 240sx Overhaul Journal: Day…
MR2 Spyder Power Steering Removal (Part 1: Try Before You Buy) MR2 Spyder Power Steering Removal (Part 2: The Vented Surge Box) MR2 Spyder Power Steering Removal (Part 3: Disabling the P/S Warning Light)
Related Links MR2 Spyder Power Steering Removal (Part 1: Try Before You Buy) MR2 Spyder Power Steering Removal (Part 2: The Vented Surge Box) MR2 Spyder Power Steering Removal (Part 3: Disabling the P/S Warning Light) MR2 Spyder Power Steering…
April 21, 2008 We’re Back! Nopi Drift in St. Louis was a blast with the exception that the event organizers made everyone stand behind 2 sets of fences. But it was fun none the less. I will post up a…
It’s the summer of 2008 and the country is going bananas over gas prices. And with the cost of gas increasing on a daily basis, there is an ever growing outcry for more fuel efficient vehicles. As a result, the…