Racecar builds and development. Modifications, fabrication, setup changes, and testing documented as they happen. The workshop side of motorsports lives here.
The exo car build has become a very detailed project, and the fact that I am using it as a huge test bed only adds to the complexity. As a result, this initial fabrication phase, including the roll cage, lasted…
The NA Miata came to me with extensive front-end damage, so much so that the frame rails forward of the front struts were cut. Although I am getting closer to painting and reassembling, I must first construct a front end.…
Although the main roll cage is complete, a few items must be fabricated before I paint the chassis. One such item is the dashboard and switch panel. I intend to run several mechanical experiments and tests with this chassis, so…
Building the roll cage for the ‘ghettocet’ is easily the most time-consuming part of this build. But here we are … finally … with a custom cage built and installed by yours truly. There are a few odds and ends…
Last year, I converted the 1.6-liter NA Spec Miata to run in the Super Touring 6 class with NASA. This power-to-weight ratio class allowed me to shed the weight of the underpowered racecar aggressively. The result was a 2230-lb racecar…
Let’s call this intermission on the Ghettocet Miata. A time to get up, stretch our legs, and see how far we have come. Frankly, I let my imagination run wild during the roll cage build, which has taken significantly longer…
It is finally here: the fabrication portion of the exo car build. Getting to this point has been quite the process: digging up all of my old equipment and piecing together a functional fabrication space. But with all of the…
The roll cage is a pivotal moment in the exo car build, and I am taking a super small step back to ensure the cage is executed properly. After all, it has been 10 years since I fabricated, installed, and…
The harsh environment of the racetrack pushes a car right to its limit and beyond. As such, racecar failures are bound to happen in many different ways. Failure Points is a new series that dissects these moments and what to…
The 1991 Mazda Miata from which I am building the exo car has led a rough life. This was especially evident when I finished the chassis cleaning in part 5; quite a bit of surface rust was exposed. Usually, I…
Didn’t I mention this may get a little confusing? In part 4, I cleaned up the chassis, removing any remnants attached to the car, cleaning up the cuts, and grinding a few miscellaneous brackets off. Now, I am physically cleaning…
The “ghettocet” project keeps growing. That’s not a bad thing but I have quickly realized that a project of this scale is going to take a bit more prep and cleanup than usual before I move on to the roll…